Home › Blog › Texas Instruments Online Assessment (2026): Aptitude, Analog, Digital and Coding Sections

Texas Instruments Online Assessment (2026): Aptitude, Analog, Digital and Coding Sections

The Texas Instruments online assessment is mainly a campus test, reported most often from university drives in India: a common aptitude section, then multiple-choice technical sections for the profile you apply to (analog, digital or embedded software), with two coding problems in some software versions. Candidates commonly report about 20 questions per section, 20 to 45 minutes per section and negative marking.

The Texas Instruments online assessment is mainly a campus test, reported most often from university drives in India: a common aptitude section, then multiple-choice technical sections for the profile you apply to (analog, digital or embedded software), with two coding problems in some software versions. Candidates commonly report about 20 questions per section, 20 to 45 minutes per section and negative marking. In the US, many internship candidates describe going from a career fair or an application straight to interviews, and some regions report a HireVue video step instead.

TI does not publish the format, so this guide lays out what candidates report, where the reports disagree, the topics behind each section and a 10-day plan. Details were checked on November 16, 2026.

Where TI uses an online test

We found no description of the assessment on TI's careers site when we checked on November 16, 2026, and no published TI rule on candidates' use of AI. Candidate reports suggest four patterns:

RouteWhat candidates reportUsual next step
Campus drives in India (full time and internship)An online test with a common aptitude section and profile-specific technical sections, run on the HirePro platform on many campuses according to one placement guideTechnical interviews on your profile, then an HR conversation
Software (SDE) campus profileAptitude and technical multiple choice, and in some drives two coding problems; one software report describes no coding at allTechnical interviews on C, data structures, operating systems and projects
US internships and new gradOften no online test; candidates describe career-fair conversations followed by an interview that mixes behavioral and technical questionsFurther interviews or an offer
Some other regionsA HireVue step with recorded video answers, written responses and a few multiple-choice questionsLive interviews

If your invitation mentions a test, expect something close to the campus format below; if it does not, prepare for the interview. Your placement cell or recruiter is the authority on which applies.

The campus test, as candidates report it

ElementWhat candidates commonly report
StructureA common aptitude section, then one technical section per profile. Candidates report being able to attempt up to two profiles, which adds a second technical section.
AptitudeAbout 14 to 20 questions in about 20 to 30 minutes.
Analog, digital or embedded sectionAbout 20 questions each, in about 30 to 45 minutes.
Software variantOne on-campus software report: 12 aptitude questions in 20 minutes, 18 technical questions in 30 minutes and two coding problems in 40 minutes. Another: 20 aptitude questions in 30 minutes and 10 technical questions in 45 minutes, with no coding.
Older formatA 2023 digital design report describes analog, digital and cognitive sections of 20 to 30 questions each, about 2 hours 15 minutes in total.
MarkingNegative marking is reported, for example +1 for a correct answer and −0.25 for a wrong one.
PlatformHirePro on many campus drives, per one placement guide.

These reports span roughly 2023 to 2026 and differ by campus, year and profile. One placement guide notes that no verified duration or question count exists for recent drives, so treat every figure as a range.

Topics, with practice examples

SectionTopics candidates reportPractice examples
AptitudePercentages, ratios, time and work, permutations and combinations, basic probability, number series, simple logicTwo pipes fill a tank in 6 and 9 hours; together they take 3.6 hours
AnalogRC time constants, op-amp configurations, MOSFET operating regions, current mirrors, Bode plots and first-order filtersA non-inverting amplifier with Rf = 9 kΩ and Rg = 1 kΩ has a gain of 10; an RC low-pass with 1 kΩ and 1 µF cuts off near 159 Hz
DigitalBoolean simplification and K-maps, latches versus flip-flops, finite state machines, setup and hold time, counters, basic VerilogA mod-10 counter needs at least 4 flip-flops; AB + AB′ simplifies to A
Embedded softwareC pointers and memory layout, bit manipulation, the volatile keyword, operating systems, OOP, databases and networking basicsPredict sizeof for a struct with padding; set, clear and toggle bit n with masks
Coding (software variant)Arrays, strings and bit manipulationNumber of 1 Bits, Reverse Bits, Single Number, Merge Sorted Array

The coding examples are well-known LeetCode problems, not questions claimed to be on the test. For the embedded section, our embedded software engineer interview questions cover pointers, interrupts and memory in more depth, and the hardware engineering intern interview questions cover the circuit fundamentals behind the analog and digital sections.

Scoring, cutoffs and proctoring

A 10-day preparation plan

This plan assumes one profile; add two days if you will attempt a second technical section.

  1. Days 1–2: Aptitude. Percentages, time and work, permutations and probability. Do 20 questions in 20 minutes each day and log every error.
  2. Days 3–5: Your profile's core. Analog: RC circuits, op-amps and MOSFET regions. Digital: K-maps, flip-flops, FSMs and timing. Embedded: C pointers, bit masks and memory layout. Thirty questions a day, then explain each miss in one sentence.
  3. Day 6: Secondary topics. Filters and Bode plots, counters and Verilog basics, or operating systems and databases, depending on the profile.
  4. Day 7: Coding, if you are on the software track. Four bit-manipulation and array problems in C or C++, timed at 20 minutes each.
  5. Day 8: Full simulation with negative marking. Aptitude plus one technical section under the reported times, scored +1 and −0.25.
  6. Day 9: Review. Redo every wrong answer and note the topics that cost marks.
  7. Day 10: Logistics. Confirm the venue or remote setup, the platform and the rules, and rest.

After the test

Shortlisted campus candidates typically report one or two technical interviews that go deep on their profile and projects, then an HR conversation. US internship candidates often describe a single hour-long interview split between behavioral questions and technical ones. If you get a recorded video step instead, our HireVue interview guide explains how timed video answers work. For the technical interviews themselves, see our Texas Instruments coding interview questions and, for analog and digital roles, the electrical engineering intern interview questions.

Expect the interviewers to push past the multiple-choice level: you may be asked to derive the result behind a question you answered, such as why a current mirror copies current, or to explain a design choice in a project on your résumé.

Where CoPilot Interview fits

CoPilot Interview is an AI interview assistant, and for the Texas Instruments online assessment its only honest role is practice beforehand. The test measures your own skills under the rules in your invitation, so no assistant, AI tool or second person belongs in it unless the invitation explicitly allows one. Before the test, the browser demo has 145 interview questions across 10 tracks, scores typed answers out of 10 and needs no signup. Once you pass, the rounds become spoken, and the AI mock interview reads questions aloud and scores each spoken answer out of 10, which is the way to rehearse explaining your approach out loud. The free plan gives 15 minutes a day of live help in sessions of up to 15 minutes, with AI mock interviews included. Standard costs $24.99 a month and Pro $39.99 a month if you want more practice time. For every live round later in the process, follow your employer's rules.

Disclosure: CoPilot Interview is our product, so weigh what we say about it accordingly.

Frequently asked questions

Does Texas Instruments give an online assessment in the US?

Not commonly. Many US internship and new grad candidates report career-fair conversations and interviews without a test. The online test is reported mainly from campus drives in India, and some regions report a HireVue step instead.

How long is the TI online test?

Candidates report about 20 to 30 minutes for aptitude and about 30 to 45 minutes for each technical section. Older reports describe about 2 hours 15 minutes in total. TI does not publish a fixed length, so check the invitation.

Is there negative marking on the TI test?

Candidates report it, for example +1 for a correct answer and −0.25 for a wrong one. Read the instructions on the day, and avoid blind guesses unless you can rule out at least one option.

Can I attempt more than one profile?

Candidates report being allowed up to two profiles, such as analog and digital, which adds a second technical section after the common aptitude section. Choose the profiles that match your coursework and projects.

Can I use AI or outside help during the TI test?

No. TI has not published anything that allows outside help, so the test must be your own work under the stated rules. Use AI tools to practice before the test, not during it.

Practice this interview before the real one

The AI mock interview builds questions from your resume and the job description, reads them aloud and scores each spoken answer out of 10. Included on the free plan.

Start a mock interview